System Sensor Silent Knight IDPssb224bi isheet

File Preview
File Preview
Click below to download for free

File Data

Name system-sensor-silent-knight-idpssb224bi-isheet-2567493108.pdf
Type PDF
Size 691.76 KB
Downloads

Text Preview

INSTALLATION AND MAINTENANCE INSTRUCTIONS Plug in Isolator Base Ratings Installing and the System Smoke Detectors Applications which provides detailed information on detector The detectors used with these bases must Information disabled when a short circuit occurs They accom from the remainder of the circuit These bases also and 4 inch square boxes with or without a plaster To mount remove the decorative ring by rotating it Guidelines and accessory devices should be color coded to the likelihood of wiring errors Improper connec signal wiring the wiring between interconnected Detector head power is supplied by terminals 1 loop resistance Consult the control panel specifica the zone wiring of all bases in the system before correct polarity ground fault testing and per 2 PAIR RECOMMENDED 2 3 4 S 1 Mounting base to electrical box ON NOT NOT INTELLIGENT RELAY COMMON NORMALLY CLOSED NORMALLY OPEN A OPTIONAL WIRING 3 Wiring diagram COMPATIBLE PANEL LINE PAIR RECOMMENDED WIRING SHOWN IS SUPERVISED OF ADDRESSABLE DEVICES ARE SEPARATED BY FAULT ISOLATOR ANY COMBINATION OF COMPATIBLE DEVICES MAY BE MIXED WITHIN A GROUP PAIR OF FAULT ISOLATOR BASES WILL DISCONNECT A OF DEVICES IF A SHORT CIRCUIT OCCURS ON THE LINE CIRCUIT WITHIN THAT GROUP Instructions 3 appropriate terminal and tighten the screw Wire the label is affixed to the base for recording the zone and type of detector being installed at the base This information is useful for setting the detec head address and for verification of the sensor type Feature Do activate this feature break the tab from the detector remove the detector from the base once the tamper feature has been activated insert a small bladed Head removal after the tamper resist feature has the plastic lever from the base However this 4A Activating the tamper resist feature 4B Removing the detector head from the LEVER TAB AT LINE BY TOWARD OF BASE SMALL BLADED TO PLASTIC LEVER DIRECTION OF refer to insert for the Limitations of Fire Alarm Systems Limited Warranty

Related Files