Simplex 4090 IDNet Semi-Flush Surface Covers and IAM Bracket Installation Instructions

4090 IDNet Semi Flush Surface Covers and IAM Bracket Installation Instructions Semi Flush Cover and 4090 9802 Surface Cover Installation modules that mount into a 4 inch back box have Simplex semi flush and surface cover options that allow viewing of the LED Install the Simplex 4090 9801 Semi Flush or 4090 9802 Surface Cover s using Figure 1 as a reference Mount the and module as follows Loosen the two 8 32 panhead screws on the 4 inch square back box Mount the module to the back box using the teardrop holes on the modules mounting bracket Secure module to back box with two 8 32 panhead screws the semi flush or surface cover to the module bracket using four 6 32 flathead screws Panhead Screw 2 Supplied Flathead Screw 4 with Cover Pipe Note 4090 9801 Cover Square Deep Box Supplied Module Pipe Note 4090 9802 Cover Light pipe on cover must be in this orientation to view LED on module 1 4 Inch Square Cover Installation 2000 Simplex Time Recorder Co Westminster MA 01441 0001 USA specifications and other information shown were current as of publication and are subject to change without notice is a trademark of Simplex Time Recorder Company A Semi Flush Cover 4090 9807 Surface Cover and 4090 9810 Bracket Installation modules that mount into a single gang back box have Simplex semi flush and surface cover options that allow viewing of the LED The 4090 9810 bracket assembly is required for the Simplex semi flush and surface cover options When not using Simplex and surface cover s the bracket is an option when mounting the IDNet module the Simplex 4090 9806 Semi Flush Cover 4090 9807 Surface Cover and 4090 9810 Bracket using Figure 2 as a reference the cover and module as follows IDNet Module tabs snap into the bracket slots Install the semi flush or surface cover and bracket to the single gang back box the two 6 32 flathead screws Box Tab s Module 2 Supplied 4090 9806 Cover Pipe Flathead Screw 2 with Cover 4090 9807 Cover Slot s Pipe Light pipe on cover must be in this orientation to view LED on module 2 Single Gang Cover Installation A