System Sensor BEAM1224 EngSpec

Product Beam Smoke Detector Specifications detector shall be a System Sensor beam type smoke detector model number BEAM1224 to Underwriters Laboratories UL 268 for Fire Protection Signaling Systems The detector be a 4 wire conventional reflected beam smoke detector The detector shall include a and receiver both within the detector unit The detector shall include a reflector The shall allow for beam alignment between the detector and the reflector to be done at the The detector shall have four standard selectable sensitivity settings along with two settings for adjustable sensitivity The detector shall be capable of automatically its sensitivity by means of advanced software algorithms The detector shall be rated for in temperatures between 22 F and 131 F Protection range shall be 16 ft to 230 ft 16 ft to 328 ft with use of long range kit model BEAMLRK Specifications Operating Voltage shall be Nominal 12 24V non polarized Minimum 10.2V Maximum The Maximum Ripple Voltage shall be 6.0 volts peak to peak of applied voltage and must fall below minimum operating voltage specification The Standby Current shall be 70 mA average The Maximum Alarm Current shall 35 mA maximum average The Alarm Ratings shall be 0.5 A 30V AC DC Specifications BEAM1224 detector dimensions shall be 10.0 inches 254 mm height 7.5 inches 191 mm 3.3 inches 84 mm depth The reflector dimensions shall be 7.9 inches 200 mm wide 9.1 230 mm height The approximate detector weight shall be 3.9 pounds 1.77 kilograms both the detector and reflector The Operating Temperature Range shall be 22 F 131 F C C The Operating Humidity Range shall be 10 to 93 RH non condensing The Input shall be 12 AWG Modes Normal standby mode the local LED shall blink Green every 5 seconds In Trouble mode the LED shall blink Yellow In Alarm mode the local LED shall be solid Red During alignment digital display shall indicate 00 99 for fine adjustment 2009