System Sensor FAAST XS 7100X User Guide

COMPREHENSIVE USER GUIDE XS 7100X Alarm Aspiration Sensing Technology Characteristics Supply Voltage Reset Time Reset Operating Current 24V Current 24V Current Requirements Contact Ratings Ratings Temperature Air Temperature Rating Area Air Movement 30 VDC monitor must be pulled low a minimum of 100 msec sec High 200mA 4.8W at 24V Med 151mA 3.7W at 24V Low 120mA 2.9W at 24V High 230mA 5.6W at 24V Med 172mA 4.2W at 24V Low 142mA 3.5W at 24V on 10mA 0.24W at 24V enabled 20mA 0.48W at 24V Modbus enabled 0.48V at 24V Indicator activated 20mA 0.48W at 24V 30VDC 0.5A 125VAC Dimensions Access Gauge Size Single Pipe Length Weight Weight in 279mm in 229mm in 15.9mm 1 inch 2.54 cm entry holes on top back of the unit Ga or in Nom or 25mm Nom ft 54.8 m all designs must be within PipeIQ lbs 3.99 kg lbs 2.98 kg 0 to 100 38 tested to 131 55 20 to 140 160 to 95 non condensing sq ft 464 sq m 4,000 ft min 0 1,219.2 m min OF CONTENTS Included With Unit 2 to FAAST XS 7100X 2 to FAAST XS via USB 2 to FAAST XS via Ethernet 2 3 Installation 3 Unit Installation 3 4 Interface 5 Level Display 5 Level Display 6 Flow Display 6 Display 6 User Interface 7 Menu Screen 9 Menu Screen 9 Screen 9 Screen 10 Screen 10 Log Screen 10 Time Screen 10 mode screens 10 Screen 10 Screen 10 Upgrade Screen 10 of Operation 10 10 Overview 10 Speed Configuration 10 and Relay Configuration 10 Indicator Configuration 10 of Configuration validation 10 glitch during configuration 10 10 10 Test 10 10 Airflow Baselines 11 11 Mode 11 Mode 11 Night And Weekend Mode 11 11 Log 11 Trend Log 11 Log 11 Monitor Reset 11 Connection 11 Connection 11 Network 11 Server 12 Notification 12 Smoke Testing 12 12 Safety Information 12 12 Statement 12 OF THIS MANUAL manual is intended as a guide for technicians to commission the FAAST Fire Alarm Aspiration Sensing Technology aspirating smoke detection of the FAAST XS system depends on the designed pipe network the site Any alteration to the pipe network must be verified by a techni as alterations will have an effect on system performance The PipeIQ tool can be used to verify the suitability of any pipe network design subsequent alterations The PipeIQ software can be downloaded at sys FAAST XS aspirating smoke detection system is an advanced particulate system for use in very early warning and early warning detection as well as standard detection in harsh environments system continuously draws air from the environment up to 5,000 sq ft a series of sampling holes to monitor the environment for smoke XS system conditions are displayed at the user interface and at a fire control panel using relays System conditions can also be monitored in ways through the network interface integrated web server or PipeIQ soft The display provides a clear indication of the system status particulate alarm levels air flow and fault conditions Additionally email notifica can be sent upon device status changes All conditions can be monitored the device user interface or remotely via the web Advanced detection Blue LED and IR laser technology Particle separation for increased nuisance immunity and prolonged life Dust discrimination for reduced false alarms Wide sensitivity range 0.00029 to 6.25 obs ft Monitors up to 5,000 sq ft dependant on local codes and ordinances Configurable alarm thresholds and delays User configurable fan speed setting Status At a Glance and LCD User Interface 5 sets of relay contacts Dedicated electronic filter life monitoring Ultr