honeywell 7 day programmable thermostat RTH7600D Manual

Operating Programmable Thermostat manual covers the RTH7600 model thermostat from wallplate and turn over to find model number thermostat contains a Lithium battery which may contain Perchlorate material Material handling may apply www dtsc ca gov hazardouswaste perchlorate EQUIPMENT DAMAGE HAZARD To prevent possible compressor damage do not cooling system when outdoor temperature is below 50 10 Help assistance with this product please visit http yourhome honeywell com call Honeywell Customer Care toll free at 1 800 468 1502 and save these instructions U S Registered Trademark Patents pending Patent No 6,595,430 7,114,554 7,274,972 7,225,054 and other patents pending Copyright 2013 Honeywell International Inc All rights reserved of contents your new thermostat features 2 at a glance 3 reference to controls 4 reference to status display 5 Operation setting 6 setting 7 setting 8 program schedules 9 schedule overrides 11 Changeover 13 filter reminder 14 features 15 replacement 16 case of difficulty 17 warranty 19 This thermostat is ready to go new thermostat is pre programmed ready to go page 3 to check settings Manual your new thermostat your new thermostat You just purchased the world most advanced easy to use thermo It has been designed to give you many years of reliable service and climate control Large Daily One touch Precise Change check thermostat is ready to go new thermostat is pre programmed and ready to go All you have to do is set the and day Then check the settings below and change if needed Set clock See page 6 Select fan setting Preset to Auto To change see page 7 Select system setting Preset to Heat To change see page 8 Program schedules Preset to energy saving levels you at work or asleep assumes you wake at am leave at 8 am return at 6 pm and go to bed 10 pm To change see pages 9 TEMP CONTROL You can override the program schedule at any time and adjust the temperature see pages 12 Manual reference to controls keys to adjust temperature see pages 11 or to make selections from screen menus Fan to select fan see page or system see 8 To On Auto Fan Mode More to set clock see 6 or furnace reminder to set program schedule see pages 10 reference to status display day of week inside temperature time Response in effect page 17 To On Auto Fan Mode setting page 8 setting page 7 display messages Cool On Cooling system is activated Heat On Heating system is activated Aux Heat On heat pump systems only Manual setting CLOCK Fan Mode time then press DONE Back set the current time display press CLOCK press s or t to adjust the time Press hold s or t to advance the time more DONE BACK The real time clock should never adjustment since it automatically for daylight savings time and stores date time information To change the current week display see System Setup in your Guide SYSTEM FAN then FAN to select fan On Fan is always on Auto Fan runs only when the heating or system is on setting SYSTEM FAN Fan Mode FAN to select mode then press DONE Auto Manual setting SYSTEM FAN Fan Mode SYSTEM to select mode press DONE Auto steps at left to select system Heat Thermostat controls only the heating Cool Thermostat controls only the cooling Auto Thermostat automatically selects heating cooling depending on the indoor temperature Off All systems are off Em Heat Thermostat controls Emergency and The Auto and Em Heat system settings may not depending on how your thermostat installed money by setting program schedules each day with different settings for weekdays and weekends to the time you awaken and the temperature you want the morning until you leave for the day am am pm pm to the time you leave home and the temperature you while you are away usually an energy saving level to the time you return home and the temperature you during the evening until bedtime to the time you go to bed and the temperature you want usually an energy saving level Manual saving settings for maximum cost savings your new thermostat thermostat is pre set with energy saving program settings We recommend these and temperatures of each time period Mon Fri Mon Fri Sat Sun Sat Sun am am pm pm your new thermostat adjust program schedules SCHEDULE Fan Mode EDIT Back To 62 Press SCHEDULE then EDIT to see weekdays Press SELECT DAY You can select multiple days program with the same settings Press NEXT STEP twice then press s or t to set time for selected day s Press NEXT STEP then s or t to set Heat for this time period Press NEXT STEP then s or t to set Cool for this time period Repeat steps 3 5 to program other time periods RETURN SLEEP then press DONE Repeat steps 1 6 to program Saturday Sunday