Notifier NFN Fire Monitoring Data Sheet

ONYXWorks NFN Fire Monitoring NOTI NFN Gateway is an intelligent gateway for the ONYXWorks fire monitoring workstation This facilitates complete monitoring and control of a standard or NFN network and is available in a PC version and an version In addition it supports full panel programming network diagnostics PC version of the gateway is the network interface for a true network and resides in ONYXWorks workstations The version is a standalone gateway and is equipped with IP thus enabling ONYXWorks users to monitor multiple sites an Ethernet network without the need for remote workstations Enables ONYXWorks workstation to monitor alarm prealarm and disabled events for Notifier fire alarm control panels a standard or high speed NFN network Adds acknowledge silence reset enable disable and activate control capability to the workstation Supports alarm control panel programming upload and modifications Standalone embedded version for ability to scale remote IP Supervised IP connections for remote workstations and Multiple workstations can access the gateway at the same time PC versions support standard wire or multimode fiber options or wire singlemode or multimode fiber Gateway redundancy for network survivability NFN Gateway is compatible with ONYXWorks and ONYX First and interfaces to NFN version 5.0 and higher for the follow panels and devices ONYX Series AM2020 AFP1010 version 5.0 SIB NET AFP 200 version 5.0 NAM AFP 300 AFP 400 version 5.0 NAM N16 PC version NFN Gateways only BACnet Gateway NCA 2 NCA Network Control Annunciator NCD Direct connection to NFS2 640 NFS 640 NFS 320 NFS2 3030 NFS 3030 fire alarm control panels NCM W or NCM F see data sheet DN 6861 NFN CONNECTIVITY order to connect to the High Speed NFN see data sheet DN one of the following high speed network control modules data sheet DN 60454 is required HS NCM W 2 twisted pair wire HS NCM WMF 2 wire and multimode fiber optic HS NCM WSF 2 wire and singlemode fiber optic HS NCM MF multimode fiber optic HS NCM MFSF multimode and single mode fiber optic HS NCM SF singlemode fiber optic and Codes NFN Gateway complies with the following UL ULC Standards NFPA 72 Fire Alarm Systems requirements 3 31 2021 Page 1 of 2 VERSION Requires an ONYXWorks Workstation see ONYXWorks data DN 7048 Operating temperature 0 to 49 32 to 120 VERSION current 450 mA 24 VDC voltage range 19 VDC to 29 VDC NFPA Class B or Class A Operating temperature 0 to 49 32 to 120 Mounts on a CHS 4L chassis in a CAB 4 Series cabinet see data DN 6857 UL 864 UL 1076 UL 2017 UL 2572 ULC S559 04 ULC S527 99 Listings and Approvals following listings and approvals apply to the modules specified this document In some cases certain modules or applications not be listed by certain approval agencies or listing may be in Consult Honeywell for the latest listing status UL ULC S597 CSFM 7300 1525 103 FM Approved FDNY COA 2020 TMCOAP 003337 AMND NFS2 3030 COA 2020 TMCOAP 003349 AMND NFS 320 Information NOTI Gateway Embedded Includes board and Surge Suppressor PNET 1 NOTI Gateway PC card for wire media card NOTI Gateway PC card for multimode media PCI card High Speed NFN Gateway PC card for multi fiber media High Speed NFN Gateway PC card for single fiber media High Speed NFN Gateway PC card for wire PC VERSION GATEWAY REQUIRED ONYXWorks Workstation P N ONYXWORKS WS EMBEDDED VERSION GATEWAY REQUIRED IBM PC with Microsoft Windows 10 document is not intended to be used for installation purposes try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice ONYX ONYXWorks and FirstVision are registered and NOTI is a trademark of Honeywell Inc and Windows are registered trademarks of the Microsoft is a registered trademark of International Business Machines Corp by Honeywell International Inc All rights reserved Unauthorized use this document is strictly prohibited of Origin USA Clintonville Road CT 06472