Siemens DB-SEAL Base Seal, Installation Instructions

Installation Instructions DB SEAL Seal use with the DB 3S Base the Model DB Seal base seal with a DB 3S to prevent moisture from condensing and col on the rear of the detector used This mois can occur when units experience different tem or humidity conditions Figure 1 wiring must comply with national and local and wire the DB 3S base by following DB 3S Installation Instructions P N Make sure that all wires are flush to the bottom of the base Position the tabs on the seal over the slots in inner rim of the base and press the seal in Check that the four openings for the spring clear the springs and the plastic supports With the seal in place install the detector Follow the checkout procedure in the detector instructions 1 the DB Seal Industry Inc Technologies Division Park NJ 315 092212 4 Building Technologies Ltd Safety Security Products Kenview Boulevard Ontario 5E4 Canada