Siemens FHD2007-U3 FHD2007-R3 3 HU Black Red Outer Door, Installation Instructions

INSTALLATION INSTRUCTIONS FHD2007 HU Black Red Outer Door Model FHD2007 black or FHD2007 red outer door from Siemens Industry Inc is used the FHB2005 U1 R1 backbox in the Cerberus PRO FV922 924 system Three FHD2006 U1 clear can be installed in the three openings of the outer door as illustrated in Figure 1 Alternatively FHD2009 U1 R1 blank plate may be substituted for the FHD2006 U1 clear window in any of the three openings The FHD2007 enclosure cover is designed for indoor use only in dry protected The or extension to the Cerberus PRO part numbers identifies the paint color and sales through which the part is marketed A in the extension designates that the part is black an designates that the part is painted red to meet local code requirements The numeral following the color designation identifies the sales channels for the part as follows FHD2007 outer door is attached to the FHB2005 U1 R1 backbox by hinges and secured by a latch Figure 1 Three FHD2006 U1 windows or FHD2009 plates are secured to the outer door eight 10 32 lock nuts per window channels 1 2 Desigo 3 Cerberus PRO OPENING 3 FOR MOUNTING WINDOW OR PLATE LATCH 1 Outer Door Industry Inc Technologies Division Park NJ FHD2007 outer door is installed after the FHB 2005 U1 R1 backbox is installed and in place and the FHD2004 U1 black or FHD2005 U1 solid black inner doors have been Referring to Figure 2 hold the FHD2007 outer door adjacent to the FHB2005 U1 R1 in the position shown and lower the upper and lower outer door hinges onto the backbox pins Remove the locking hex nut marked from the stud and insert the loose end of the ground marked over the stud Reinstall the locking hex nut on the stud and tighten firmly to prevent loosening during vibration PLACES PIN PLACES BACKBOX DOOR NUT 2 the FHD2007 U3 R3 Outer Door on the FHB2005 U1 R1 Backbox each window opening install either an FHD2006 U1 clear window or an FHD2009 U1 R2 blank using the eight 10 32 self locking hex nuts provided with the window or plate Close the outer door and secure it with the key latch FHD2007 outer door can be used with the FHB2005 U1 R1 backbox FHD2006 U1 clear window part ID S54400 C46 A1 or the FHD2009 U1 blank plate part ID and S5440 B114 A2 can be used with the FHD2007 U3 outer door The FHD2009 R2 plate can be used with the FHD2007 R3 outer door WITH PART FHD2007 U3 R3 is shipped assembled dimensions W x 13 16 D x 42 L lbs GA 060 1008 or 1010 cold rolled steel phosphating treatement powder coating Black for FHB2007 U3 Red for FHB2005 R3 page has been left intentionally blank Industry Inc Technologies Division Park NJ Canada Limited Technologies Division Kenview Boulevard Ontario L6T 5E4 Canada ID A6V10360714 en a A5Q00058006