Ultra Electronics TCPA-10 UL1480, Class I Division 2 Medium Power Speaker

TCPA 10 Class I Division 2 Medium Power Speaker Signaling Notification Speaker Leading Voice STI PA Excellent 139dB Max SPL 1 Meter Rated for Indoor or Outdoor Universal Mounting Interface Built In Transformer 25V 70V or 4 8 Ohm Configurable Durable Environmental Resistant Rating Response Angle Range UL1480 ULC CSFM Class I Division 2 Up to 90W continuous 4 ohm model 375Hz 15kHz nominal 400Hz 4kHz general signaling 112dB 1W 1m Avg 400 4,000Hz 60 3dB 90 6dB 9lbs 10.1 x 10.1 x 11.3 D 40 60 CERTIFICATION N A Not certified L 1480 and Class I Division 2 certified COLOR CODE 01 Black 04 Gray 05 Red 06 White Distributed Audio Direct Drive CONFIGURATION 801 8 ohm 802 4 ohm 90219A only HyperSpike TCPA 10 is intended for indoor and outdoor signaling and notification The five power settings have designed to interface with industry standard amplification 90 wide acoustic beam makes it an ideal notification tool for and outdoor areas The optional dual mount system a 180 wide beam that is ideal for outdoor perimeter Its best in class acoustic coverage allows for fewer units to installed in large indoor and outdoor areas lowering and maintenance costs while also intelligibility and esthetics Best in industry voice and intelligibility combined with sharp and high impact capability make it the right choice for ensuring messages heard and understood and Engineer Specifications paging and tone signaling loudspeaker shall be Ultra Electronics Model see Model numbers above Unit shall UL1480 Listed and Class I Division 2 certified weather resistant and constructed of rugged 5VA rated UV resistant ABS The loudspeaker shall be able to operate within any ambient temperature environment ranging from 40 to 60 speaker shall have a sensitivity of 112dB when measured at 1m AVG 400 4,000Hz and a beamwidth of 90 6dB at Model shall be a non re entrant compression loaded transducer with a 3 polyimide diaphragm and power handling 45W continuous The coil shall be a nominal 8 ohm impedance and ferro fluid shall surround the coil to optimize heat When applicable transformer power settings shall be selectable and include 100V 45W 32W 24W 16W 8W 24W 16W 12W 8W 4W 25V 3W 2W 1.5W 1W 0.5W Speaker shall contain in line capacitor to allow DC of wiring and be supplied with three feet of conduit with flying leads Frequency response shall be 375Hz Dimensions shall be 10.1 x 10.1 x 11.3 72377B 801 Wall Mount Bracket 72378B 801 Dual Unit Mounting Adapter 72379B 801 Pole Mount Adapter Rev C Electronics USSI 4868 East Park 30 Drive Columbia City IN 46725 8861 1 of 4 Class I Division 2 Medium Power Speaker Voltage Output Ratings 3 Fast Siren Sweep Tone SPL SPL dB SPL 1m 1m 10ft Range 80dB Distributed Audio Tone dB SPL Max RMS 1 meter Watts 25V 70V 100V Voltage SPL SPL dB SPL 1m 1m 10ft Range 80dB Ohm Ohm Direct Drive Tone dB SPL Max RMS 1 meter Ohm 802 Ohm 801 3 Fast Siren Sweep Tone UL Standard SPL Measurement Specifications Ingress Protection Temperature Range to NEMA 3R standards 60 non condensing Rev C Electronics USSI 4868 East Park 30 Drive Columbia City IN 46725 8861 2 of 4 Class I Division 2 Medium Power Speaker 1kHz 2kHz 4kHz 8kHz Patterns Frequency Response 4 and 8 1M Impedance 4 and 8 Comparison Plot Rev C Electronics USSI 4868 East Park 30 Drive Columbia City IN 46725 8861 3 of 4 Class I Division 2 Medium Power Speaker Reference TCPA 10 has a three foot long Size flexible conduit with 20 wires exiting the end The power selection switch is located on the of and Mounting Reference Trade Size Conduit has a nominal unit see Figure 2 ID OD and Mounting Reference 1 2 Figure 3 UNIT single unit double unit Figure 4 Figure 5 Rev C Electronics USSI 4868 East Park 30 Drive Columbia City IN 46725 8861 4 of 4